3
ALWAYS be sure rammer will not tip over, roll slide, or fall when not being operated.
ALWAYS turn engine OFF when rammer is not being operated.
ALWAYS guide the rammer in such a way that the operator is not squeezed between the rammer and
solid objects. Special care is required when working on uneven ground or when compacting coarse
material. Make sure to stand firmly when operating the machine under such conditions.
ALWAYS operate the rammer in such a way that there is no danger of it turning over or falling in, when
working near the edges of breaks, pits, slopes, trenches and platforms.
Operator Safety while using Internal Combustion Engines
Internal combustion engines present special hazards during operation and fueling! Failure to follow the
safety guidelines described below could result in severe injury or death.
WARNING
DO NOT smoke while operating rammer.
DO NOT smoke when refueling engine.
DO NOT refuel hot or running engine.
NO NOT refuel engine near open flame.
DO NOT spill fuel when refueling engine.
Service Safety
Poorly maintained equipment can become a safety hazard! In order for the equipment to operate safely
and properly over a long period of time, periodic maintenance and occasional repairs are necessary.
WARNING
DO NOT attempt to clean or service rammer while it
is running.
DO NOT operate rammer with safety devices or
guards removed or not in working order.
DO NOT operate rammer without air cleaner.
DO NOT remove air cleaner paper element,
precleaner, or air cleaner cover while operating
rammer.
DO NOT alter engine speeds. Run engine only at
speeds specified in Technical Data Section.
Prior to Starting the Operation
This machine is of oil bath lubrication system.
Check the oil level through a window at rear end of the foot. Replenish oil if oil is not visible at the
window. For lubrication, use automobile engine oil of 10W-30 SE, SF or better grade. Capacity is
830cc.
Fill the fuel tank with regular gasoline (unleaded). Simultaneously, check engine oil and make it a habit
to replenish on the earlier side. Low lubrication oil level may result in engine seizure due to
DO NOT operate rammer near open flames.
ALWAYS refill fuel tank in well-ventilated area.
ALWAYS replace fuel tank cap after refueling.
ALWAYS check fuel lines, fuel cap, and fuel tank for leaks
and cracks before starting engine. Do not run machine if fuel
leaks are present, or fuel cap or fuel lines are loose.
LWAYS replace safety devices and guards afte
repairs and maintenance.
LWAYS keep area around muffler free of debris in
order to reduce to chance of an accidental fire.
LWAYS do Periodic Maintenance as recommended
in Operator’s Manual.
LWAYS clean debris from engine cooling fins.
LWAYS replace worn or damaged components with
spare parts designed and recommended by
MASALTA for servicing this rammer.
(15 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern